Quantum DLT 1 Interface Manual page 106

Chapter 4: SCSI Commands
Table 4-37. MODE SELECT EEPROM Vendor Unique Page — Parameter Descriptions
Name
RewindOnReset
SCSIBusDMATimer
SCSIInqVS
SCSIRdyEarly
SCSIReselRetries
SCSIResRelNOP
4-64
Value Rep Default
ASCll 1
Binary
ASCll 2
Decimal
ASCll 0
Binary
ASCll 0
Binary
ASCll 10
Decimal
ASCll 0
Binary
July 2004
Length
(Bytes)
1 When set to 0, the tape drive does not
rewind on BUS RESET or BDR msg
(Caution: May have partial block data
written to the medium, if reset happens
during writing),
When set to 1, the tape drive rewinds the
media to BOT upon reset.
1 Sets the number of seconds the tape drive
times out waiting for ACK once DMA
transfer starts. When set to 0, the timer is set
to infinite.
1 When set, returns vendor unique INQUIRY
string.
1 When set, the tape drive reports READY
status earlier.
1 The number of reselection retries the tape
drive makes before giving up. Each
reselection retry occurs every 1 second.
When set to 0, the tape drive performs
infinite reselection retries.
1 When set, SCSI RESERVE/RELEASE
UNIT commands are NOP.
Usage
81-81276-01 Rev A01