Push Button; Passive House Function - SystemAir SAVE VTR 300/B Installation Manual

Component/product — Article number:
• Presence detector/IR24 — 6995
Configuration
1. Go to Service menu
2. Enter password (default 1111)
3. Go to Input menu. Select UNIVERSAL tab.
4. Select the universal input to which wire from the pres-
ence detector is connected.
If, for example, it is connected to UI3 on the connection
board, then select UNIVERSAL INPUT 3. Set signal
type as Digital Input and select your desired
function.
Any movement in the motion sensor working area will activate your selected function.
7.5.6

Push button

A push button is a simple mechanical button which can be used to activate one of many available functions.
Universal input can be easily re-configured to activate a different function.
Component/product — Article number:
• Push button — 9693
Configuration
1. Go to Service menu
2. Enter password (default 1111)
3. Go to Input menu. Select UNIVERSAL tab.
4. Select the universal input to which wire from the push
button is connected.
If, for example, it is connected to UI3 on the connection
board, then select UNIVERSAL INPUT 3. Set signal
type as Digital Input and select your desired
function.
Pressing a push button will activate your selected function.
7.6

Passive House function

To enable Passive House function:
1. Activate Passive House function in menu (HMI or APP). Go to Service menu. Enter your password (default 1111).
Then go to Components menu, select Heat Exchanger and turn on Passive house function.
2. Install filter kit approved by Passive House Institute (PHI).
Component/product — Article number:
• Filter kit BFVTR 300 — 211587
| v01
Accessories | 49