Using Your Heater - Russell Hobbs RHFH1005 Instructions Manual

1. Before connecting to the mains socket, position the
appliance away from curtains, furniture or wall
coverings and other flammable materials.
2. Insert the mains plug into a suitable 10 Amp mains socket.
3. To activate the heater, turn the power control dial
clock wise to the fan icon for cool air, the '•' setting
for the low heat setting (1000W) and to the '••'
setting for the maximum heat setting (2000W).
4. Turn the Thermostat Control clockwise to increase
the temperature.
Note: this appliance will not operate if the thermostat has
been set too low.
Note: If the thermostat dial is set toward the highest setting
and the power control is set to off then the indicator light will
not stay illuminated. No heat will be emitted as the power to
the heating elements is off.

USING YOUR HEATER

9