Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russell Hobbs RHFH913
Summary of Contents for Russell Hobbs RHFH913
- Page 1 INSTRUCTIONS AND WARRANTY MODEL NO. RHFH913 Russell Hobbs EXTREME ECO Fan Heater...
-
Page 2: Important Safeguards
Congratulations on purchasing our Russell Hobbs Extreme Eco Fan Heater. Each unit is manufactured to ensure safety and reliability. Before using this appliance for the first time, please read the instruction manual carefully and keep it for future reference. FEATURES OF THE FAN HEATER... - Page 3 12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to disconnect the heater from the mains. Always unplug the unit when not in use, before cleaning or when adding or removing parts. 13.
-
Page 4: Parts Diagram
PARTS DIAGRAM 1. Thermostat 2. Power selector switch 3. Motor unit and air grid (front) Air inlet grid OPERATING INSTRUCTIONS • Power selector switch POSITION FUNCTION Appliance off SUMMER Cool air ٭ Warm air Eco function ٭RAPID Rapid heating • Room Thermostat The thermostat maintains the desired temperature: once reached, the appliance automatically turns off and will turn on again as soon as the temperature level drops. - Page 5 POSITION FUNCTION ٭ Antifreeze Maximum temperature • Fan heater function -Turn the power selector switch as seen below according to the desired type of heating: Position :٭ECO heating AT the ECO position you save up to 35% energy consumption. You will be able to warm your room to 60°C at 1400W where a normal heater will work at 2200W to heat the same room up to 60°C.
-
Page 6: Cleaning And Maintenance
-Turn the power selector switch as follows: Position :٭ECO to gradually increase the temperature by +5ºC. :٭RAPID Position to quickly increase the temperature by +5ºC. CLEANING AND MAINTENANCE • This appliance is for household use only and is not user-serviceable. •... -
Page 7: Changing The Plug
There are no user serviceable parts in this appliance. If the unit is not operating correctly, please check the following: • You have followed the instructions correctly • That the unit has been wired correctly and that the wall socket is switched on. •...