Using Your Heater - Russell Hobbs RHFH1008B Manual

HOW TO TURN THE HEATER ON
1. Before connecting your appliance to the mains socket,
position the appliance upright on the floor, at least 70cm
away from the wall, curtains, furniture or wall coverings.
2. Insert the mains plug into a suitable wall mains socket.
3. Then turn the power control dial to select your desired
function: Fan ,Low 1200W (LOW), High 2000W (HIGH),
4. Turn the temperature control dial clockwise, when you
hear a "pop" sound this means that the temperature
control is active, continue to adjust the temperature
control dial to your desired temperature.
5. To set the heater to Oscillate, locate the Oscillation
function button at the rear of the appliance. Press the
button and the unit will start to oscillate..

USING YOUR HEATER

7