3. Install the:
a.
base cover
NOTE:
Installing of base cover is required only if the M.2 SSD module in slot 3, 5 or 6 are accessed.
b.
battery
c.
battery cover
d.
SD card
4. Follow the procedure in
Coin-cell battery
Removing the coin cell battery
1. Follow the procedures in
2. Remove the:
a.
SD card
b.
battery cover
c.
battery
d.
base cover
3. To remove coin cell battery:
a. Disconnect the coin cell battery cable from the system [1].
b. Pry and lift the coin cell battery from the system [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
49