f. Connect the keyboard cable, fingerprint cable and fingerprint button cable to the connectors on the system board.
NOTE:
Ensure that you fold the keyboard data cable in perfect alignment.
2.
NOTE:
Ensure that you fold the keyboard data cable in perfect alignment.
3. Install the:
a.
battery
b.
battery cover
c.
SD card
4. Follow the procedure in
Base cover
Removing the base cover
1. Follow the procedure in
2. Remove the:
a.
SD card
b.
battery cover
c.
battery
3. To remove the base cover:
a. Remove the 2 (M2.5X5.0) screws that secure the base cover to the system [1].
b. Slide the rubber feet towards the rear end to disengage the base cover and lift the base cover away from the system [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
33