Using The Keystone Button; Using The Info. Button; Using The Freeze Function; Using The Image Button - Panasonic PT-TW230EA Operating Instructions Manual

Basic operations by using the remote control

Using the KEYSTONE button

This function allows you to correct keystone distortion.
button
Press the <KEYSTONE> button on the remote control
or on the control panel. The Keystone dialog box
appears. Press ▲▼ to correct keystone distortion.
The keystone adjustment can be stored
Operation
Reduce the
upper width
with press
▲
.
Reduce the
lower width
with press
▼
.
Note
The white arrows indicate that there is no correction.
z
A red arrow indicates the direction of correction.
z
An arrow disappears at the maximum correction.
z
If you press the <KEYSTONE> button on the remote
z
control or on the control panel once more while the
keystone dialog box is being displayed, the keystone
adjustment will be canceled (
The adjustable range is limited depending on the input
z
signal.

Using the INFO. button

This function allows you to display the information
menu.
button
Press <INFO.> button on the remote
control.
Note
For details, see "Input Source Information Display " in
z
"Information" under Main menu (
32
- ENGLISH
.
( Æ page 47)
Screen image
Æ page 47).
page 58).
Æ

Using the FREEZE function

You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
Press the <FREEZE> button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
<FREEZE> button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
Note
When no signal inputs,
z

Using the IMAGE button

This function allows you to select a desired image
mode of the screen.
button
Press <IMAGE> button on the remote control to select
the desired image mode among [Dynamic], [Standard],
[Real], [Cinema], [Blackboard (Green)], [Colorboard],
[Image 1], [Image 2], [Image 3] and [Image 4].
Note
For details, see "Image select" of Main menu.
z
( Æ page 42)

Using the MUTE button

Press this button on the remote control to select [On]
to temporarily turn off the sound.
button
Press <MUTE> button on the remote
control.
Note
To turn the sound back on, press this button again to
z
select [Off] or press the <VOLUME +/–> buttons.
Æ
( page 49)
mark will appear.