Table of Contents
Advertisement
1.3 Starting Up
Turn your device on and off
To turn on your device, press the POWER button. When you turn on your device for the first
time, you are asked to complete a calibration process. For more information, see "Calibrate
the device".
To turn off your device, hold the POWER button for a few seconds. A message will then be
displayed, prompting you whether or not to turn off the device completely.
Note
Quickly pressing the POWER button turns off your device temporarily and switches it to sleep
mode. You will still be able to receive messages and calls while your device is in sleep mode.
Calibrate the device
Calibrating the device screen involves tapping with the stylus the center of a cross as it
moves around the screen. This process ensures that when you tap the screen with your
stylus, the tapped item is activated.
If your device does not accurately respond to screen taps, follow these steps to re-calibrate
it:
1.
Tap Start > Settings > System tab > Screen.
2.
On the General tab, tap Align Screen, then follow the on-screen instructions to
complete the calibration.
Calibrating the device
Getting Started 15
Advertisement
Table of Contents
