Table of Contents
Advertisement
110 Exchanging Messages and Using Outlook
•
Server name. A descriptive name, such as your wireless service provider name.
•
Gateway. Location of the MMS server, which is usually in the form of an IP address.
•
Port number. HTTP port number used for connecting to the MMS server and for file
transfer.
•
Server address. URL address of the MMS server.
•
Connect via. Select The Internet from the drop-down list.
•
Sending size limitations. Select the maximum MMS message size allowed by
your wireless service provider.
•
WAP version. Select either WAP 1.2 or WAP 2.0, depending on which one is being
used by your wireless service provider.
5.
Tap OK.
The MMS server settings will then be added as an entry on the MMS Configuration
screen.
Note
If you add several MMS service providers to the MMS Configuration screen, you can choose
one as your default MMS provider. Select the MMS provider's name in the list then tap Set As
Default.
Advertisement
Table of Contents
Need help?
Do you have a question about the S200 and is the answer not in the manual?