QTek S200 User Manual page 102

102 Exchanging Messages and Using Outlook
Setting
User name
Password
Domain
Account type
Account name
Incoming mail
server
Outgoing mail
server
Require SSL
connection
Outgoing
mail requires
authentication
Use separate
settings
Outgoing server settings:
User name
Password
Domain
Require SSL
for outgoing
mail
Tip You can set up several e-mail accounts in addition to your Outlook E-mail account.
Description
Enter the user name assigned to you by your ISP or network administrator. This is
often the first part of your e-mail address, which appears before the at sign (@).
Choose a strong password. You have the option to save your password so you do
not need to enter it each time you connect to your e-mail server.
Not required for an account with an ISP. May be required for a work account.
Select POP3 or IMAP4.
Enter a unique name for the account, such as Work or Home. This name cannot
be changed later.
Enter the name of your e-mail server (POP3 or IMAP4).
Enter the name of your outgoing e-mail server (SMTP).
Select this to ensure you always receive e-mail for this account using an SSL
connection. This enables you to receive personal information more securely.
Please note that if you select this and your ISP does not support an SSL
connection, you will not be able to connect to receive e-mail.
Select this if your outgoing e-mail server (SMTP) requires authentication. Your
user name and password from above will be used.
Select this if your outgoing e-mail server requires a different user name and
password than the ones you entered before.
Enter your user name for the outgoing e-mail server.
Enter your password for the outgoing e-mail server.
Enter the domain of the outgoing e-mail server.
Select this to ensure you always send e-mail from this account using an SSL
connection. This enables you to send personal information more securely. Note
that if you select this and your ISP does not support an SSL connection, you will
not be able to send e-mail.