Configuration Memories - QSC RAVE 520uz Hardware Manual

8 input cobranet enabled signal processor
Table of Contents

Advertisement

General Information & Configuration Memories
Network
The network should be operable and QSControl.net software should be installed/running on the system controller computer.
CobraNet Connection Loss
If you are operating with a valid CobraNet network, and the connection to the network is disrupted, audio will momentarily mute, allow-
ing the RAVE 520uz to synchronize with its internal clock. If CobraNet network connection is re-established, the audio will mute again
while the RAVE 520uz synchronizes with CobraNet.

Configuration Memories

The RAVE 520uz has non-volatile storage locations that contain settings for the device as well as DSP signal flow. The storage loca-
tions make it possible to set up the RAVE for different situations and quickly recall the setup with or without QSControl.net software
using the front panel controls.
13

Advertisement

Table of Contents
loading

Table of Contents