QSC RAVE 520uz Hardware Manual page 4

Introduction (continued)
Unlike other configurable DSP boxes, the intrinsic process-
ing latency of the RAVE 520uz is both short and fixed at
0.396 milliseconds. The delay does not change regardless of
the DSP configuration, unless the configuration intention-
ally adds more delay.
The RAVE 520uz also supports the new optional low-latency
CobraNet feature that provides transport at only 2.66 milli-
seconds delay.
Both software and firmware can be easily updated over the
network. In the future, QSC will be adding new capabilities
to both RAVE and QSControl.net. Our latest code releases
and access to up-to-date information on RAVE and QSCon-
Block Diagram
4
trol.net are available at www.qscontrol.net. We invite you
to visit us there.
We've applied our many years of experience in supporting
high-end installed sound with our previous system-building
products such as RAVE, QSControl, CM16a, DSP-3, DSP-4,
and DSP-30. The RAVE 520uz brings all that technology
together in one compact, powerful, easy to use system. We
are confident that your new RAVE 520uz will provide years
of dependable service and we hope it will help you, the sys-
tem designer and implementer, to express your creative
audio system ideas.