Before Use; Operation And Use; Charging The Power Bank - Silvercrest TPB 10000 A1 Operation And Safety Notes

The product should never be charged at a PC or notebook,
because due to the high power consumption, the PC or
notebook could be damaged.
P Before use
NOTE: Remove all packaging materials from the product.
Please also check the content of delivery inside the
packaging to see if there are any damages. If you notice
any damage or missing parts, please contact the dealer who
sold this product.
P Operation and use

Charging the power bank

The built-in rechargeable battery must be fully charged before
using the product.
To charge the power bank
with an output voltage and current matching the rated input
voltage and current as stated in "Technical specifications" of
this user manual.
ATTENTION! The power bank should not be charged
from a PC or notebook.
In order to get the fastest charging speed, charge the
powerbank
Type C cable (not included) and a USB Power Delivery (PD)
enabled power charger (not included). Connect the USB
Type C plugs of your Type C to Type C cable to the PD port
of the powerbank
1
enable power charger (see fig. A).
via the PD port
3
and the PD port of your USB PD
3
only use power supplies
3
using a USB Type C to
1
GB/IE 31