Table of Contents
Advertisement
Section 3
Adjusting Threshold Values
■ CHARA 1
●Switch to ADJ Mode.
Setting item
Density distribution
value
■ CHARA 2
●Switch to ADJ Mode.
Setting item
Correlation value
ZFV
56
User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
●Adjustment of correlation value
UP/DOWN keys:
Change values.
Range
0 to 100
This is the value that is judged as OK when the density deviation
value during teaching is taken to be 100%.
●Adjustment of correlation value
Measured value
Correlation value
UP/DOWN keys:
Change values.
Range
0 to 100
This is the lower limit of the correlation value with the teaching model.
This value or above is judged as OK.
Measured value
Density distribution value
Details of Adjustment
Details of Adjustment
Advertisement
Table of Contents
