Jeep GRAND CHEROKEE L 2023 Owner's Manual page 300

298 SAFETY
WARNING!
Improper installation of a child restraint to the

LATCH anchorages can lead to failure of the
restraint. The child could be badly injured or
killed. Follow the child restraint manufac-
turer's directions exactly when installing an
infant or child restraint.
Child restraint anchorages are designed to

withstand only those loads imposed by
correctly-fitted child restraints. Under no
circumstances are they to be used for adult
seat belts, harnesses, or for attaching other
items or equipment to the vehicle.
Installing Child Restraints Using The
Vehicle Seat Belt
Child restraint systems are designed to be secured
in vehicle seats by lap belts or the lap belt portion
of a lap/shoulder belt.
WARNING!
Improper installation or failure to properly secure

a child restraint can lead to failure of the restraint.
The child could be badly injured or killed.
Follow the child restraint manufacturer's

directions exactly when installing an infant or
child restraint.
The seat belts in the passenger seating positions
are equipped with a Switchable Automatic Locking
Retractor (ALR) that is designed to keep the lap
portion of the seat belt tight around the child
restraint so that it is not necessary to use a locking
clip. The ALR retractor can be "switched" into a
locked mode by pulling all of the webbing out of the
retractor and then letting the webbing retract back
into the retractor. If it is locked, the ALR will make
a clicking noise while the webbing is pulled back
into the retractor.
Refer to the "Automatic Locking Mode" description
on Ú page 275 for additional information on ALR.
Please see the table below and the following
sections for more information.