Engine Oil Life Reset - Jeep GRAND CHEROKEE L 2023 Owner's Manual

100 GETTING TO KNOW YOUR INSTRUMENT PANEL
Custom Tile Configuration
To customize the instrument cluster further, you
are able to select up to five tiles to display
information based on your needs.
Press the MENU button for the Home Screen

display
Menu Button
Navigate Left or Right to highlight desired tile

Press OK to select the tile and navigate to the

selected submenu and press OK again to add
your selection to your tile view
The main menu options of the home screen are

Driver Info, Vehicle Info, Navigation — If
Equipped, Audio, and Off Road
You can customize your Instrument Cluster Display
with up to five tiles that may consist of the
following:
NOTE:
These options may vary based on your vehicle trim
level.
Home Screen Options
Navigation — If Equipped

Map Display

Trip A/B

Vehicle Info

Coolant Temp

Trans Temp

Oil Temp

Oil Pressure

Battery Voltage

Oil Life

Tire Pressure

Fuel Economy

Driver Info — If Equipped

Posted Speed Limit Sign

Driver Assist

Audio

Audio Info

Off Road

Selec-Terrain Status/ Air Suspension Status

— If Equipped
Steering Angle

Pitch & Roll

E O L R
NGINE IL IFE ESET
Use this QR code to access your
digital experience.
Oil Change Required
Your vehicle is equipped with an
engine oil change indicator system.
The "Oil Change Required"
message will display in the
instrument cluster display for five seconds after a
single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means
the engine oil change interval may fluctuate,
dependent upon your personal driving style.
Unless reset, this message will continue to display
each time the ignition is placed in the ON/RUN
position. To turn off the message temporarily, push
and release the OK or arrow buttons. To reset the
oil change indicator system (after performing the
scheduled maintenance), refer to the following
procedure.