Yamaha SCR 950 Owner's Manual page 45

NO. ITEM CHECK OR MAINTENANCE JOB
Swingarm pivot • Check operation and for exces-
11 *
bearings
• Check belt condition.
• Replace if damaged.
12 * Drive belt
• Check belt tension.
• Adjust if necessary.
• Check bearing assemblies for
13 * Steering bearings
• Moderately repack with lithium-
• Make sure that all nuts, bolts and
14 * Chassis fasteners
Brake lever pivot
15 • Lubricate with silicone grease.
shaft
Brake pedal pivot • Lubricate with lithium-soap-
16
shaft
Clutch lever pivot • Lubricate with lithium-soap-
17
shaft
• Lubricate with lithium-soap-
Shift pedal pivot
18
shaft
• Check operation.
19 Sidestand • Lubricate with lithium-soap-
• Check operation and replace if
20 * Sidestand switch
sive play.
looseness.
soap-based grease.
screws are properly tightened.
based grease.
based grease.
based grease.
based grease.
necessary.
Periodic maintenance and adjustment
ODOMETER READING
1000 km 10000 km 20000 km
(600 mi) (6000 mi) (12000 mi)
√
At the initial interval and every 4000 km (2500 mi) thereafter.
√ √
√
√
√
√
√
√
√ √
6-6
30000 km 40000 km
(18000 mi) (24000 mi)
√ √ √
√
√ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
ANNUAL
CHECK
6
√
√
√
√
√
√
√