Instrument and control functions
To set the clock
3
1. Clock
1. Use the "SELECT" switch to chan-
ge the display to the clock mode.
2. Push the "SELECT" switch for 5
seconds. The hour digits will start
flashing.
3. Use the "SELECT" switch to set
the hours.
4. Push the "SELECT" switch for one
second and the minute digits will
start flashing.
5. Use the "SELECT" switch to set
the minutes.
6. Push the "SELECT" switch for one
second to start the clock.
Handlebar switches
Left
1
1
2
3
4
1. Pass switch "
"
2. Dimmer switch "
3. Turn signal switch "
4. Horn switch "
"
Right
EAU1234M
1. Start/Engine stop switch "
2. "SELECT" switch
3. Hazard switch "
/
"
/
"
Pass switch "
Press this switch to flash the headlight.
TIP
When the dimmer switch is set
to "
fect.
Dimmer switch "
Set this switch to "
beam and to "
3-7
/
/
"
"
"
", the passing switch has no ef-
/
"
" for the high
" for the low beam.
1
2
3
EAU12352
EAU12401