Yamaha SCR 950 Owner's Manual page 32

Table of Contents

Advertisement

Instrument and control functions
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the start/engine stop switch is set to "
3. Turn the key on.
4. Shift the transmission into the neutral position.
3
5. Slide the switch toward "
Does the engine start?
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Slide the switch toward "
Does the engine start?
The system is OK. The motorcycle can be ridden.
".
YES
NO
YES
NO
".
YES
NO
WARNING
If a malfunction is noted, have a Yamaha
".
dealer check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
3-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xvs950xr-a

Table of Contents