Table of Contents
Advertisement
72
1-2. Child safety
If the child restraint has a top tether strap, follow the child
4
restraint manufacturer's operation manual regarding the installa-
tion, using the top tether strap to latch onto the top tether strap
anchor. (P. 73)
After installing the child restraint system, rock it back and forth to
5
ensure that it is installed securely. (P. 69)
When installing in the rear center seat
■
There are no LATCH anchors behind the rear center seat. How-
ever, the inboard LATCH anchors of the outboard seats, which are
16.1 in. (410 mm) apart, can be used if the child restraint system
manufacturer's instructions permit use of those anchors with the
anchor spacing stated.
Child restraint systems with rigid lower attachments cannot be
installed in the center seat. This type of child restraint system can
only be installed in the outboard seat.
■
Laws and regulations pertaining to anchors
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.
This vehicle is designed to conform to SAE J1819.
PRIUS_OM_OM47C35U_(U)
Advertisement
Table of Contents
Troubleshooting
