Table of Contents
Advertisement
How to initialize the tire pressure warning system
■
Park the vehicle in a safe place and turn the power switch off.
1
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
2
pressure level. (P. 762)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the power switch to ON mode.
3
Switch the multi-information display to the
4
(P. 149)
Press
5
(Vehicle Settings)", and then press
Press
6
nance System", and then press
Press
7
and then press
Press and hold
8
When
9
pletes, a message is dis-
played
information display and the
tire pressure warning light
illuminates.
◆
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by your Toyota dealer.
PRIUS_OM_OM47C35U_(U)
or
of the meter control switches, select "
or
of the meter control switches, select "Mainte-
or
of the meter control switches, select "TPMS",
.
.
initialization
com-
on
the
multi-
7-3. Do-it-yourself maintenance
screen.
.
.
625
7
Until Complete
Advertisement
Table of Contents
Troubleshooting
