Blade Attachment - Hinkley SCULPT 903680FMB-LDD Instruction Manual

BLADE ATTACHMENT

Adapter Plate
The screws need to be the serrated head screw
10
| hinkley.com
NOTE:
Assemble blade to motor with provided screws, lock washers and at
washers. Repeat procedure for all blades. Make sure screws are TIGHT!
Loose motor screws can contribute to unnecessary wobble or fan noise.
Blades
Screws
Remove any rubber supports that are installed for
shipping.
NOTE:
Cordless power screwdrivers are NOT recommended,
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws. Use a large at blade screwdriver
for nal tightening to fully compress the washers. This
will help ensure proper alignment of the blades and
noise-free, wobble-free running.