Daikin ETVZ16S18EA6V Installer's Reference Manual page 201

EPRA14~18DAV3+W1 + ETVZ16S18+23EA6V+9W
Daikin Altherma 3 H HT F
4P644739-1 – 2021.02
a WLAN cartridge
b Router
c Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface:
Mode: Turn AP mode ON (= WLAN adapter active as access point) or OFF.
# Code
[D.1] N/A
Reboot: Reboot the WLAN cartridge.
# Code
[D.2] N/A
WPS: Connect the WLAN cartridge to the router.
# Code
[D.3] N/A
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the Daikin Residential Controller app.
Remove from cloud: Remove the WLAN cartridge from the cloud.
# Code
[D.4] N/A
Home network connection: Read out the status of the connection to the home
network.
The WLAN cartridge needs to be inserted in the
user interface. See the installation manual of the
WLAN cartridge.
Field supply.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Description
Enable AP mode:
▪ No
▪ Yes
Description
Reboot the gateway:
▪ Back
▪
OK
Description
WPS:
▪ No
▪ Yes
Description
Remove from cloud:
▪
No
▪ Yes
10 Configuration
|
Installer reference guide
201