Table of Contents
Advertisement
AXIS Q1932–E PT Mount Thermal Network Camera
About applications
The direction is represented by a blue arrow. Objects crossing the line, in the direction of the arrow, will trigger the alarm
or event. If both arrows are present, both directions are monitored.
Note
The line will not trigger properly if positioned too close to the edge of the image.
6. Check the Visual Confirmation box to verify that the line was configured correctly. The line will flash red when touched.
To edit the Cross Line Detection configuration, follow the above procedures. Click Save to retain the changes.
Note
AXIS Cross Line Detection must either have a status of Idle or Running for the CrossLineDetection option to appear in
the drop-down list under Events.
7. To configure an action rule if the line has been touched and for more information about configuring action rules, see
About events .
25
Advertisement
Table of Contents
