Table of Contents
Advertisement
Battery Installation/Replacement
To install or remove the batteries, the following steps should be followed:
1. Make sure the AC power adapter is
unplugged.
2. Remove the indicator from the scale
mounting bracket. (Referring to
Figure No. 3, pull the spring plunger
down and slide the indicator away
from the bracket).
3. Turn the indicator over so that the
display is facing away from you.
4. Locate the rectangular panel on the
back of the indicator.
5. To install or replace the batteries, first
remove the battery holder cover by
pushing in on the tab and lifting it up.
Refer to Figure No. 4.
6. If installing new batteries, proceed to
step 7. If replacing the batteries,
remove all 6 batteries from the battery
holder and then proceed to step 7.
7. Install the 6 new "AA" size batteries in
the battery holder, noting the polarity
markings located in the battery
holder. Refer to Figure No. 5.
8. After placing all 6 batteries in the
holder, replace the battery cover.
9. Turn the indicator over (display facing
up) and press the ON / OFF key.
10. If display turns on, batteries have
been installed correctly. If not,
remove panel and check for one or
more improperly positioned batteries.
11. Return the indicator to the scale
mounting bracket.
12. The indicator is now ready for
operation.
6
INSTALLATION, CONT.
Battery
Cover
AC Power
Adapter
8555-M260-O1 Rev J • 750EU Owner's
Push in and
lift here
Figure No. 4
+
-
-
+
+
-
-
+
+
-
-
+
Figure No. 5
Advertisement
Table of Contents
