Table of Contents
Advertisement
SETUP AND CALIBRATION, CONT.
Unit= (WEIGHING UNIT)
Press the BMI / ENTER key to view the current setting. If the value displayed is acceptable,
press the BMI / ENTER key again. Otherwise, press the or keys to scroll through and
select a new value and then press the BMI / ENTER key to save it and proceed to the next
prompt. Allowable values are: 1, 2, 3 or 4.
1 = Pounds Only
3 = Pounds/Kilograms
5 = Pounds & Ounces/Kilograms (if USA=1)
UnS= (MOTION (UNSTABLE) RANGE)
The Motion (Unstable) Range is the number of divisions of change permitted before the
STABLE annunciator turns off.
Press the BMI / ENTER key to view the current setting. If the value displayed is acceptable,
press the BMI / ENTER key again. Otherwise, press the or keys and the or keys to
scroll through and select a new value and then press the BMI / ENTER key to save it and
proceed to the next prompt. Allowable values are 0 through 99.
dPP= (DECIMAL POINT POSITION)
Press the BMI / ENTER key to view the current setting. If the value displayed is acceptable,
press the BMI / ENTER key again. Otherwise, press the or keys to scroll through and
select a new value and then press the BMI / ENTER key to save it and proceed to the next
prompt. Allowable values are: 0, 1, 2, or 3.
0 = XXXXXX
CAP= (SCALE CAPACITY)
Press the BMI / ENTER key to view the current setting. If the value displayed is acceptable,
press the BMI / ENTER key again. Otherwise, press the or keys and the or keys to
scroll through and select a new value and then press the BMI / ENTER key to save it and
proceed to the next prompt. Allowable values are: 1 through 99,999.
FLT= (DIGITAL FILTER LEVEL SELECTION)
Your indicator will arrive with factory filter settings of 1 = Minimal. Please check with Tech
Support before changing filter level, break range and sample rate.
Press the BMI / ENTER key to view the current setting. If the value displayed is acceptable,
press the BMI / ENTER key again. Otherwise, press the or keys to scroll through and
select a new value and then press the BMI / ENTER key to save it and proceed to the next
prompt. Allowable values are:
0 = Minimal Filter
NOTE! If 3 = Custom Filter is selected, two additional prompts will be displayed.
12
2 = Kilograms Only
4 = Kilograms/Pounds
1= XXXXX.X
2 = XXXX.XX
1 = Moderate Filter
2 = Heavy Filter
8555-M260-O1 Rev J • 750EU Owner's
3 = XXX.XXX
3 = Custom Filter
Advertisement
Table of Contents
