Number Of Rings - VTech DS6151 A User Manual

Answering system settings

Number of rings

You can choose from two, four, or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have new
messages, and after four rings when you have no new messages. This
enables you to check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local area.
To change the setting:
Using the telephone base:
1. Press the MENU softkey when the telephone base is not in use.
2. Press the SELECT softkey to select Answering sys.
3. Press / or /
CID DIR
2, then press the SELECT softkey. The corresponding
icon, or
, flashes on the screen.
1 2
4. Press / or /
CID DIR
press the SELECT softkey.
5. Press / or /
CID DIR
the SELECT softkey.
6. Press / or /
CID DIR
then press the SET softkey to confirm your setting or
press CANCEL to exit to the previous menu without
making any changes.
Using the handset:
1. Press the MENU softkey when the handset is not in use.
2. Press the SELECT softkey to select ANSWERING SYS.
3. Press or to select Mailbox 1 or Mailbox 2, then
press the SELECT softkey. The corresponding icon,
1
or , flashes on the screen.
2
4. Press or to select Ans sys setup, then press the
SELECT softkey.
5. Press or to select # of rings, then press the
SELECT softkey.
6. Press or to select 2, 4, 6, or Toll saver, then press
the SET softkey to confirm your setting or press the
BACK softkey to exit to the previous menu without
making any changes.
to select Mailbox 1 or Mailbox
to select Ans sys setup, then
to select # of rings, then press
to select 2, 4, 6, or Toll saver,
27
1
Announcement
# of rings
Remote code
SELECT
1
# OF RINGS
2
4
SELECT
1
ANS SYS SETUP
Announcement
# of rings
Remote code
BACK SELECT
1
# OF RINGS
2
4
6
BACK SET