Announcement; Play Your Announcement - VTech DS6151 A User Manual

Answering system settings

Announcement

The telephone is preset with a greeting that answers calls with "Hello, please
leave a message after the tone." You may use this preset announcement, or
replace it with your own.

Play your announcement

Using the telephone base:
1. Press the MENU softkey when the telephone base is
not in use.
2. Press the SELECT softkey to select Answering sys.
3. Press / or /
CID DIR
2, then press the SELECT softkey. The corresponding
icon, or
flashes on the screen.
1 2,
4. Press / or /
CID DIR
then press the SELECT softkey.
5. Press / or /
CID DIR
then press the SELECT softkey.
6. The telephone base announces, "To play, press 2.
To record, press 7." Press 2 to play and the screen
shows Announcement playback, or press CANCEL
to exit to the previous menu.
Using the handset:
1. Press the MENU softkey when the handset is not
in use.
2. Press the SELECT softkey to select ANSWERING SYS.
3. Press or to select Mailbox 1 or Mailbox 2, then
press the SELECT softkey. The corresponding icon,
1
or flashes on the screen respectively.
2,
4. Press or to select Ans sys setup, then press the
SELECT softkey.
5. Press or to select Announcement, then press the
SELECT softkey.
6. The handset announces, "To play, press 2. To record,
press 7." Press 2 to play and the screen shows
Announcement playback, or press the BACK softkey
to exit to the previous menu.
to select Mailbox 1 or Mailbox
to select Ans sys setup and
to select Announcement and
23
1
Call screening
Announcement
# of rings
SELECT
1
ANNOUNCEMENT
2-Play 3-Delete
7-Record
1
Announcement
playback
DELETE STOP
1
ANS SYS SETUP
Call screening
Announcement
# of rings
BACK SELECT
1
ANNOUNCEMENT
2-Play 3-Delete
7-Record
BACK
1
Announcement
playback
DELETE STOP