Volvo XC40 Owner's Manual page 383

Stop the vehicle by applying the brakes
•
and keep the brake pedal depressed. The
engine will auto-stop.
In Comfort or Eco drive mode, the engine
may auto-stop before the vehicle has com-
pletely stopped.
With Adaptive Cruise Control or Pilot Assist
activated, the engine will auto-stop about
three seconds after the vehicle has stopped.
Auto-start
The following conditions must be met for the
engine to auto-start.
Release the brake pedal. The engine will
•
auto-start and the vehicle can be driven.
On an uphill gradient, Hill Start Assist
(HSA 9 ) will activate to help prevent the
vehicle from rolling backward.
When the Auto-hold function is activated,
•
auto-start will be delayed until the acceler-
ator is pressed.
When Adaptive Cruise Control or Pilot
•
Assist are activated, the engine will auto-
start when the accelerator pedal is
depressed or the button on the left-
side steering wheel keypad is pressed.
Maintain pressure on the brake pedal and
•
press the accelerator pedal. The engine
will auto-start.
9 Hill Start Assist
On a downhill gradient: Release the brake
•
pedal slightly so that the vehicle begins to
roll. The engine will auto-start after a slight
increase in speed.
Symbols in the instrument panel
The symbol will be displayed in
•
the tachometer when the function is avail-
able.
An indicator in the tachometer will point
•
toward when Start/Stop is active
and the engine has auto-stopped.
The symbol will be grayed-out
•
when the function is not available.
No symbol will be shown when the func-
•
tion is turned off.
STARTING AND DRIVING
The function is active and the engine has auto-stop-
ped.
Related information
Deactivating the Start/Stop function
•
(p. 382)
Conditions for the Start/Stop function
•
(p. 382)
Start/Stop function (p. 380)
•
Hill Start Assist (p. 368)
•
Auto-hold brakes (p. 367)
•
381