Volvo XC40 Owner's Manual page 140

DISPLAYS AND VOICE CONTROL
Voice control for cellular phones
Call a contact in the phone book, have a text
message read aloud or dictate short mes-
sages using voice commands to a Bluetooth-
connected phone.
To access a contact in the phone book, the
voice command must contain the contact
information entered in the phone book. If a
Robyn Smith
contact, e.g.
numbers listed in the phone book, a number
category such as home or
specified, i.e. " Call Robyn Smith cellular
Tap and say one of the following com-
mands:
Call [contact]
" " - call the selected con-
•
tact from the phone book.
" Call [phone number]
•
number.
" Recent calls " - display the list of recent
•
calls.
" Read message " - read a text message
•
aloud. If there are several messages,
select the message to read aloud.
" Message to [contact]
•
prompted to dictate a short message. The
message will then be read aloud and the
user can choose to send or re-dictate the
message. The vehicle must be connected
to the Internet to access this function.
20 Certain markets only.
138
20
Related information
Voice Control (p. 135)
•
Use voice recognition (p. 136)
•
Voice control for radio and media (p. 138)
•
Climate control system voice commands
•
(p. 186)
Voice control settings (p. 139)
•
, has several phone
Internet-connected vehicle* (p. 462)
•
cellular can also be
".
" - call a phone
" – the user is
Voice control for radio and media
Voice commands for the radio and media
players are shown below.
Tap and say one of the following com-
mands:
" Media " - initiates a dialog for media and
•
radio and displays examples of com-
mands.
" Play [artist] " - plays music by the
•
selected artist.
" Play [song title] " - plays the selected
•
song.
" Play [song title] from [album]
•
the selected song from the selected
album.
Play [radio station]
" " - starts the
•
selected radio station.
" Tune to [frequency] " - tunes to the
•
selected radio frequency in the currently
active waveband. If no radio source is
active, the FM band will be started as
default.
" Tune to [frequency] [waveband]
•
tunes to the selected radio frequency on
the selected waveband.
" Radio " - starts FM radio.
•
" Radio FM " - starts FM radio.
•
* Option/accessory.
21
" - plays
" -