Volvo XC40 Owner's Manual page 253

Stability system
The Roll Stability Control (RSC
helps reduce the risk of a rollover in the event
of e.g. a sudden evasive maneuver or if the
vehicle begins to skid.
The system monitors the lateral angle at which
the vehicle is leaning and registers any
changes. Using this information, the system
calculates the likelihood of a rollover. If there is
an imminent risk of a rollover, Electronic Sta-
bility Control is activated, engine torque is
reduced and brakes are applied to one or more
of the wheels until the vehicle has regained
stability.
WARNING
The vehicle's stability systems help
improve vehicle safety but do not replace
the driver's responsibility for operating the
vehicle in a safe manner. Speed and driving
style should always be adapted to the cur-
rent road, traffic and weather conditions.
Posted speed limits should always be
respected.
Related information
Electronic Stability Control (p. 247)
•
10 Roll Stability Control
11 Cruise Control
12 Adaptive Cruise Control
Cruise control
10 ) system Cruise Control (CC
maintain an even speed to provide a more
relaxing driving experience on highways and
long, straight roads with even traffic flows.
Overview
Function buttons and symbols.
: Activates Cruise Control from
standby mode and resumes the set speed
: Increases the set speed
: From standby mode – activates
Cruise Control and sets the current speed
: From active mode – deactivates/
puts Cruise Control in standby mode
11 ) can help the driver
DRIVER SUPPORT
: Reduces the set speed
Marker for set speed
The vehicle's current speed
Set speed
NOTE
In vehicles equipped with Adaptive Cruise
12
Control*(ACC ), it is possible to switch
between Cruise Control and Adaptive
Cruise Control.
* Option/accessory.
}}
251