Volvo XC40 Owner's Manual page 259

Selecting and activating Adaptive
20
Cruise Control*
21
Adaptive Cruise Control (ACC
selected and then activated before it can reg-
ulate speed and distance.
To start the function:
The driver's seat belt must be buckled and
•
the driver's door must be closed.
There must be a vehicle ahead (target
•
vehicle) within a reasonable distance or
20 Depending on market, this function can be either standard or optional.
21 Adaptive Cruise Control
your vehicle's current speed must be at
least 15 km/h (9 mph).
Press the ◀ (2) or ▶ (3) button on the
1.
) must first be
steering wheel keypad and scroll to the
Adaptive Cruise Control symbol
> Gray symbol – Adaptive Cruise Control
is in standby mode.
2. When Speed Limiter is selected, press
(1) on the steering wheel keypad to
activate.
> White symbol – Speed Limiter starts
and the current speed is stored as the
maximum speed.
Reactivating Adaptive Cruise Control
to the last stored speed
When Adaptive Cruise Control is selected,
–
press
activate.
> The Cruise Control marking in the
instrument panel will change from
GRAY to WHITE and the vehicle will
then return to the most recently set
speed.
(4).
on the steering wheel keypad to
DRIVER SUPPORT
WARNING
A noticeable increase in speed may follow
when the speed is resumed with the
steering wheel button.
Additional markings in the instrument
panel
ACC will only regulate the
time interval to the vehicle
ahead when the distance
symbol shows two vehicles.
A speed interval will be
marked at the same time.
The higher speed is the
stored speed for your vehicle
and the lower speed is the
speed of the vehicle ahead
(target vehicle).
Related information
Adaptive Cruise Control* (p. 254)
•
Deactivating Adaptive Cruise Control*
•
(p. 258)
* Option/accessory.
}}
257