Positioning the vehicle in the parking space
Parallel parking positioning overview.
Perpendicular parking positioning overview.
97
Park Assist Pilot
1.
Move the gear selector to the gear instruc-
ted by the system. Wait until the steering
wheel turns and then drive slowly forward.
2. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
3. Engage reverse gear and back up slowly.
4. Be prepared to apply the brakes when
instructed to do so by a graphic and mes-
sage in the center display.
The function will switch off automatically and
a graphic and message will appear to indicate
that parking has been completed. Adjust-
ments can always be made be the driver after-
ward. Only the driver can determine when the
vehicle is correctly parked.
CAUTION
The warning distance is shorter when the
sensors are used by Park Assist Pilot
(PAP
97
) compared to when they are used
by the Parking Assist system.
Auto-brake during a parking sequence
If, while parking, the parking sensors detect a
vehicle or pedestrian in the vehicle's intended
direction of travel behind or in front of the
DRIVER SUPPORT
vehicle, the auto-brake function will bring the
vehicle to a standstill.
A pop-up message will then appear in the
instrument panel and the driver can tap
Cancel
to cancel the parking sequence or
Resume
to continue the parking sequence.
After selecting
Resume
:
Check that the area around the vehicle is
–
free of obstructions and follow the instruc-
tions on the center display, such as:
To continue
–
Gently accelerate away
from object
.
Related information
Park Assist Pilot* (p. 345)
•
Park Assist Pilot* limitations (p. 350)
•
* Option/accessory.
349