Operating Instructions - Landa SEA 2.8/1000 Operator's Manual

Operating Instructions

STEP 1: Connect garden hose to
the cold water source and turn
water on completely. Never use hot
water.
STEP 4: Turn machine on by
pushing switch at front of machine.
The five color-coded quick connect nozzles provide a wide array of spray
widths from 0° to 40° and are easily accessible when placed in the conve-
nient rubber nozzle holder, which is provided on the front of the machine.
NOTE: For a more gentle rinse, select the white 40° or green 25° nozzle.
To scour the surface, select the yellow 15° or red 0° nozzle.
10
STEP 2: Trigger the spray gun to
eliminate trapped air then wait for a
steady flow of water to emerge
from the spray wand. Then install
nozzle.
Landa SEA MS Operator's Manual 9.801-720.0 - AJ
STEP 3: Connect to appropriate
power supply. Push GFCI reset
button.
WARNING! Never replace
nozzles without engaging the
safety latch on the spray gun
trigger.
AVERTISSEMENT: Ne jamais
remplacer les buses sans
d'abord mettre le dispositif de
sécurité sur la détente du
pistolet pulvérisateur.