11
SERVICE WORK ON THE CHASSIS
11.21
Mounting the seat
11.22
Removing the air filter box cover
11.23
Installing the air filter box cover
–
Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
F00016-10
–
Mount and tighten screws
Guideline
Remaining screws, chassis
F00017-10
Condition
The air filter box cover is secured.
–
Remove screw
A00009-10
–
Pull off the air filter box cover in area
A00009-11
–
Insert the air filter box cover in area
A00009-12
1
.
M6
1
.
A
sideways and remove it toward the front.
A
and clip it into area
53
10 Nm (7.4 lbf ft)
B
.