10
TUNING THE CHASSIS
10.14
Handlebar position
(SX‑F EU)
–
Remove protection caps
–
Turn adjusting screws
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
M00014-10
Guideline
Rebound damping
Comfort
Standard
Sport
–
Mount protection caps
(SX‑F US, XC‑F US)
–
Turn the red adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
B01489-10
Guideline
Rebound damping (SX‑F US)
Comfort
Standard
Sport
Rebound damping (XC‑F US)
Comfort
Standard
Sport
On the upper triple clamp, there are two holes at a distance of
Hole distance A
The holes on the handlebar support are placed at a distance of
Hole distance B
The handlebar can be mounted in four different positions. In this way, the handlebar
can be mounted in the position that is most comfortable for the rider.
800116-10
.
clockwise all the way.
Info
Adjusting screws
are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
.
all the way clockwise.
Info
Adjusting screw
is located at the upper end of the right fork leg.
The rebound damping is located in the right fork leg REB (red adjusting
screw). The compression damping is located in the left fork leg COMP
(white adjusting screw).
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
15 mm (0.59 in)
3.5 mm (0.138 in)
14 clicks
12 clicks
10 clicks
17 clicks
15 clicks
13 clicks
17 clicks
15 clicks
13 clicks
to each other.
from the center.
32