Table of Contents
Advertisement
11
SERVICE WORK ON THE CHASSIS
11.19
Installing the shock absorber
–
Detach springs
Spring hooks (50305017000)
–
Remove screw
–
Press the shock absorber toward the rear and remove the manifold.
–
Remove the cable binder(s).
–
Remove screw
–
Take off the frame protector.
Info
Pay attention to the holding lugs.
L02308-10
–
Remove screw
–
Remove the shock absorber from the top.
L02309-10
x
Main work
–
Insert the shock absorber from above.
–
Position the shock absorber.
–
Mount and tighten screw
Guideline
Screw, top shock absorber
L02310-10
–
Position the manifold.
–
Attach springs
Spring hooks (50305017000)
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Position the frame protector.
Info
Pay attention to the holding lugs.
–
Mount and tighten screw
Guideline
Screw, frame protector
L02308-11
.
.
.
.
.
M10
.
.
.
60 Nm
Loctite
(44.3 lbf ft)
M8
25 Nm
(18.4 lbf ft)
M5
3 Nm (2.2 lbf ft)
43
®
2701™
Advertisement
Table of Contents
