Logging Into Two-Factor Authentication - Motorola APX 1000 User Manual



Logging into Two-Factor Authentication

Procedure:
Press the preprogrammed User Login button and proceed to
Step 3.
OR
Follow the procedure below.
1 < >
or to User.
2
Press the Menu Select button directly below User.
3
The display shows the User Login screen.
4 U D
or to {ID Entry} and press the Menu Select button
directly below Edit. A blinking cursor appears.
Use the keypad to type or edit a username.
<
Press to move one space to the left.
>
Press to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
*
Press to add a space.
0
Press to toggle between mixed case mode, uppercase
mode, and lowercase mode.
#
Press to toggle between numeric and letter mode.
Press the Menu Select button directly below Ok to submit.
OR
U D
or to scroll through the list of predefined usernames.
Press the Menu Select button directly below Sel to select
the predefined username.
OR
U D
Press and hold or to scroll through the list of predefined
usernames at a fast scroll rate.
Press the Menu Select button directly below Sel to select
the predefined username.
5
If the selected predefined username has more than the
maximum allowed characters, or an invalid character in it,
the display shows momentary Invalid ID. Repeat Step 4.
OR
For radio enabled with Unit ID, proceed to step 6 to enter
your Unit ID.
OR
Use the keypad to enter your password and proceed to step
8.
6 U D
or to {UnitID Entry} and press the Menu Select button
directly below Edit. A blinking cursor appears. Use the
keypad to type or edit a Unit ID.
Press the Menu Select button directly below Ok to submit.
OR
U D
or to scroll through the list of predefined Unit IDs.
Press the Menu Select button directly below Sel to select
the predefined Unit ID.
OR
U D
Press and hold or to scroll through the list of predefined
Unit IDs at a fast scroll rate.
Press the Menu Select button directly below Sel to select
the predefined Unit ID.
85
English