Table of Contents
Advertisement
13
BRAKE SYSTEM
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
13.12
Checking the rear brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be glad to help.)
13.13
Changing the rear brake linings
Warning
Danger of accidents Incorrect maintenance will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop will be glad to help.)
Preparatory work
–
Check the rear brake linings. (
Main work
–
Stand the vehicle upright.
–
Remove screw cap
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount the screw cap with the membrane and the O-ring.
Info
Clean up overflowed or spilled brake fluid immediately with water.
K00565-10
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
»
If damage or cracking is visible:
–
Change the rear brake linings.
E00349-10
p. 85)
with membrane
and the O-ring.
.
p. 124)
≥ 1 mm (≥ 0.04 in)
(
p. 85)
(
p. 85)
.
85
Advertisement
Table of Contents
