Table of Contents
Advertisement
10
SERVICE SCHEDULE
10.1
Additional information
Any further work that results from the required work or from the recommended work must be ordered separately and can be invoiced
separately.
10.2
Required work
Read out the fault memory using the KTM diagnostics tool.
Check that the electrical system is functioning properly.
Check and charge the battery.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. (
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Check the frame and swingarm.
Check the swingarm bearing for backlash.
Check the heim joints at the top and bottom of the shock absorber.
Check the tire condition. (
Check the tire air pressure. (
Check the wheel bearing for play.
Check the wheel hubs.
Check the rim run-out.
Check the spoke tension. (
Check the chain, rear sprocket, motor sprocket, and chain guide. (
Check the chain tension. (
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation.
Check/correct the fluid level of the hydraulic clutch. (
Check the brake fluid level of the front brake. (
Check the free travel of the hand brake lever. (
Check the play of the steering head bearing. (
Check the valve clearance.
Check the clutch.
Change the engine oil and oil filter and clean the oil screens.
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect routing.
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
Clean the air filter and air filter box.
Change glass fiber yarn filling in the main silencer.
Check the screws and nuts for tightness.
Check the headlight setting. (
Change the fuel screen.
Check the fuel pressure.
Check idle.
Check that the radiator fan is functioning properly.
Final check: Check the vehicle is roadworthy and take a test ride.
Read out the error memory after the test ride using the KTM diagnostics tool.
Make the service entry in the KTM Dealer.net and in the Service and Warranty Booklet.
p. 81)
p. 85)
p. 79)
p. 84)
p. 83)
p. 91)
p. 91)
p. 92)
p. 71)
p. 80)
p. 79)
p. 60)
p. 101)
(
p. 66)
p. 99)
(
p. 108)
p. 73)
p. 76)
(
p. 109)
(
p. 67)
Every 30 operating hours/after every race
Every 15 operating hours
Once after 1 operating hour
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
41
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Advertisement
Table of Contents
