Table of Contents
Advertisement
Maintenance
Remove/Reset devices from a group – standard method
Purpose:
Each of the MasterConnect components are secure i.e. devices once claimed by a user cannot be used by another
user. In case any adaptations are needed on an existing installation, these MasterConnect wireless components need
to be released from the app. Only then, the reset devices can be used in other groups, projects or by other users.
Either entire group or single devices can be reset via the MasterConnect App.
How to:
• Remove a single light: In the group overview, choose the light to be removed by selecting the three dots next to
the light and choose "Remove from group". The intensity of the light goes to full light level. Repeat this step for
other individual lights in the group.
• Remove all switches: In the group overview, go to "Switches" tab. Select the three dots and choose "Remove switches
and ZGP sensors"
• Remove an individual switch (for SNx211): Press the 3 dots on the right of the switch name and select "Remove switch."
• Remove group: Same as above 2 scenarios, a group is removed by clicking on the three dots and choosing
"Remove group." As a feedback, the intensity of all lights goes to full light level.
Remarks:
• When Remove Group does not finish in first attempt, advise to make a second attempt to finish.
• For the removal of switches, all devices of the group controlled by a switch need to be in range of the smartphone.
PLt-20022UM - EasySense MasterConnect User Manual 09/22 page 21 of 43
Advertisement
Table of Contents
