Advertisement
Orientation
Select between desktop front, desktop rear, ceiling front and ceiling rear mode.
The image will be flipped and/or reversed accordingly.
System Information
Displays information about the projector network connection and the status.
More Control
For more detailed control, the projector has two protocols built in for control that can
be used either through the RS232 connector or through the LAN connector. A simple
instruction set (SIS) ASCII protocol gives access to the most frequently used commands.
In addition, a binary protocol is available where each command is a series of 32 bytes in
one packet. The protocols allow for both SET and GET operations.
a detailed description of configuration, use and command set is described in a separate
document "RS232 and LAN communication protocol and command set"
Advertisement
