Advertisement
The Crystalio II projector control is a system for controlling the projector
through the
video processor. To control the projector, the RS232 or network connector
must be connected. see illustration for details. Read the crystalio and the
projector userguide for further information.
From the Crystalio II to the Action! model three 1080, only a single link of
connection is needed for basic operation. This link is a HDMI-to-DVI cable
that can be as long as up to 25m / 75ft. This cable will carry a 1920x1080
progressive signal, processed in the Crystalio II. In addition, for projector
control, a similar length RS232 cable should be connected. This will give full
access to all functions of the projector, through the same menu interface as
that of the Crystalio II.
The Crystalio II will process and forward all incoming signals to the
projector, processed and scaled up to it's native 1920 x 1080 resolution.
This will be the same whether the input is standard TV or DVD signals at
480i or 576i (NTSC or PAL), or whether the input is High Definition, 1080i or
720p.
Main features of the Action! model three 1080 / Crystalio II combination
include;
• Broadcast Quality video processing.
• Single Link between source connections and projector unit.
• Industry's best connectivity and compatibility.
• Single remote control and menu interface for all system control.
RS232 cable
HDMI to DVI cable
Advertisement
