Larson Electronics IDCMR-IP-POE-4MP User Manual page 6

1. Scan through the list of devices the SADP Tool discovered for the Inactive device you want to activate (see
below). Click on the device in the list to highlight it, and then click the select box to check it.
2. In the Device Activation window, create a password for the admin (administrator) username:
a. In the Device Activation window, enter a password for admin in the New Password field. Use a
combination of uppercase, lowercase alphabetic characters and numbers to create a "Strong" password.
The rating is shown beneath the field. See above.
b. Enter the admin password again in the Confirm field, and then click Activate.
c. Record your admin password for reference later.
CAUTION: If you lose your admin (administrator) password, you cannot configure the device or restore it to its factory
settings. To reset you password, call your support organization for specific instructions.
Larson Electronics, LLC
Phone: (877) 348-9680 Fax: (903) 498-3364
IP Camera Network Setup Guide
www.larsonelectronics.com
6 of 10