Toyota Sequoia 2018 Manual page 450

Table of Contents

Advertisement

450
7-2. Steps to take in an emergency
Warning light
(Yellow)
SEQUOIA_OM_USA_OM0C011U
Warning light/Details/Actions
PCS warning light
When the warning light flashes:
Indicates a malfunction in the PCS (Pre-Collision Sys-
tem)
→ Have the vehicle inspected by your Toyota dealer
immediately.
When the warning light illuminates:
Indicates that the PCS (Pre-Collision System) is tem-
porarily unavailable, possibly due to either of the fol-
lowing:
• An area around the radar sensor or camera sensor
being dirty or covered with condensation, ice, stick-
ers, etc.
→ Clear the dirt, condensation, ice, stickers, etc.
(→P. 248, 464)
• Radar sensor or camera sensor operational condi-
tions (such as temperature, etc.) being not met
→ Driving is possible in this case. The PCS (Pre-Col-
lision System) will be enabled if the operational
conditions (such as temperature, etc.) are met
again.
• Either the VSC (Vehicle Stability Control) system or
PCS (Pre-Collision System) is disabled or both are
disabled.
→ To enable the PCS, enable both the VSC system
and PCS. (→P. 239, 305)
LDA (Lane Departure Alert) indicator
The indicator comes on and a warning message is dis-
played to indicate that the LDA (Lane Departure Alert)
system is not available temporarily or has detected a
malfunction.
→ P. 457
Low fuel level warning light
Indicates remaining fuel is approximately 4.0 gal.
(15 L, 3.3 Imp.gal.) or less
→ Refuel the vehicle.
*
1

Advertisement

Table of Contents
loading

Table of Contents