Table of Contents
Advertisement
Turning the BSM function/RCTA function on/off
1
Press "<" or ">" of the meter control switches, select
2
Press "∧" or "∨" of the meter control switches, select "BSM" or
"RCTA", and then press
The function switches On/Off with each
Changing the BSM indicator brightness
1
Press "<" or ">" of the meter control switches, select
2
Press "∧" or "∨" of the meter control switches, select "BSM Bright-
ness", and then press
The brightness changes with each
Changing the Rear Cross Traffic Alert warning buzzer volume
1
Press "<" or ">" of the meter control switches, select
2
Press "∧" or "∨" of the meter control switches, select "RCTA Vol-
ume", and then press
The warning buzzer volume changes with each
■
The outside rear view mirror indicators visibility
When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.
■
Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear over loud noises, such as if the
audio system volume is high.
■
When there is a malfunction in the Blind Spot Monitor/Rear Cross Traffic
Alert system
If a system malfunction is detected due to any of the following reasons, warn-
ing messages will be displayed: (→P. 459, 459)
●
There is a malfunction with the sensors
●
The sensors have become dirty
●
The outside temperature is extremely high or low
●
The sensor voltage has become abnormal
SEQUOIA_OM_USA_OM0C011U
4-5. Using the driving support systems
.
press.
.
press.
.
279
.
.
.
press.
4
Advertisement
Table of Contents
