Table of Contents
Advertisement
■
The power back door can be opened when
●
The engine switch is in the "ON" position, and the shift lever is in P.
●
The engine switch is in the "ACC" or "LOCK" position.
■
Jam protection function
If anything obstructs the power back door while it is closing/opening, the back
door will automatically operate in the opposite direction.
■
If the power back door does not work
The back door must be initialized. To initialize, close the back door completely
by hand and unlock the back door.
■
Back door closer
In the event that the back door is left slightly open, the back door closer will
automatically close it to the fully closed position.
■
Fall-down protection function
While the power back door is opening automatically, applying excessive force
to it will stop the opening operation to prevent the power back door from rap-
idly falling down.
■
Customization that can be configured at Toyota dealer
Settings (e.g. power back door) can be changed.
(Customizable features →P. 520)
SEQUOIA_OM_USA_OM0C011U
3-2. Opening, closing and locking the doors
113
3
Advertisement
Table of Contents
