Toyota Sequoia 2018 Manual page 187

Positions for towing hitch receiver and hitch ball
Hitch receiver pin hole position:
46.2 in. (1172.3 mm)
Connecting trailer lights
Use the wire harness stored in the
rear end under the vehicle body.
The tow
designed for 64 watts/5 amps of
electrical current per side (right
and left) for the trailer brake/turn
light functions.
Please contact your Toyota dealer
with any questions or concerns.
■
Service connector for towing brake controller (with towing package)
Your vehicle is equipped with a service
connector for the trailer brake controller
as shown.
Access the service connector.
Remove the scuff plate.
Remove the clip (screw type) and trim
board.
SEQUOIA_OM_USA_OM0C011U
lighting system is
4-1. Before driving
187
4