Table of Contents
Advertisement
282
4-5. Using the driving support systems
BSM function
The Blind Spot Monitor function uses radar sensors to detect vehicles
that are traveling in an adjacent lane in the area that is not reflected in
the outside rear view mirror (the blind spot), and advises the driver of
the vehicles existence via the outside rear view mirror indicator.
BSM function detection areas
The areas that vehicles can be detected in are outlined below.
The range of each detection area
is:
Approximately 11.5 ft. (3.5 m)
from the side of the vehicle
The first 1.6 ft. (0.5 m) from the
side of the vehicle is not in the
detection area.
Approximately 9.8 ft. (3 m) from
the rear bumper
Approximately 3.3 ft. (1 m) for-
ward of the rear bumper
SEQUOIA_OM_USA_OM0C011U
Advertisement
Table of Contents
